Description

The Knightsbridge LEDTD2 is a 24V DC plug-in power connector designed to feed mains power into Knightsbridge LED linkable flat striplight systems. The connector accepts a 24V DC input from a compatible driver or transformer and transfers that power to the striplight via a two-pin plug fitting that clips directly into the end of the strip.

The connector is rated to a maximum load of 36W, which supports typical single-run installations of Knightsbridge flat striplights up to approximately 3 metres depending on the specific striplight wattage per metre. The IP20 rating confines use to dry indoor locations such as under-cabinet lighting in kitchens, wardrobe interiors, shelving, and display cases where the connector body will not be exposed to moisture or direct contact with dust.

The black plastic housing measures 41mm long by 33mm wide with an 8mm projection from the mounting surface, keeping the connector compact enough